Hyundai comes with a lot of safety features, and one of them is the Forward safety system. The system uses radars or cameras to determine the obstacle at the of the car.
Like other safety features in a vehicle, they tend to encounter some problems. This issue could be due to problems with related sensors, radar, or cameras.
In addition, the camera or radar are the only factors that could cause the warning message to come up. The weather condition, dirt, and system malfunction can contribute to triggering the warning message.
What is a Hyundai Check Forward Safety System?
Hyundai checks forward safety system is an error message that comes up when the forward safety system encounters some issues. This error message can be traced to problems with the system’s camera.
The Hyundai forward safety system is a collision avoidance system like Autonomous Emergency Braking (AEB). It serves the purpose of reducing the effects of collision.
The forward safety system uses a camera strategically positioned at the front of the vehicle. It scans for cars, pedestrians, bicycles, and other potential collision threats.
Once the camera collects information and a potential collision are detected. It is sent to the system. It then sends an alert to the driver, bringing to notice the potential collision ahead. In this situation, danger lights, beeps, and vibrations in the driver’s seat will be triggered.
If there is no immediate response, the brakes will be applied automatically. However, the brakes may not be applied automatically when driving at high speed.
There have been complaints of the warning message “check forward safety system.” It shows that the forward safety system has encountered a problem and may be unable to function correctly. Many factors could cause it, but the leading cause is the system’s camera.
Although the warning message may not have any effect on the driving condition of the vehicle, it must be taken seriously.
What are the causes of Hyundai Check Forward Safety System?
The primary cause of the check forward safety system can be traced to the system’s camera sensor. Any factor not allowing the camera sensor to collect and transfer data to the system properly will trigger the error message.
Below are some causes of the check forward safety system warning message.
1. Dirty camera
A dirty camera completely blinds the check-forward safety system. It prevents the system from detecting potential collisions and renders it dormant.
Due to the camera’s location, it is easy to neglect it when cleaning the car thoroughly. After a while, dirt clogs the camera. Other factors like rain or snow can also clog the camera, preventing the system from detecting potential collisions.
2. Temperature around the camera
The weather condition you are driving in could also contribute to the error message on the dashboard. Extremely high or low weather conditions are known to affect the camera’s image quality.
In high or temperature rates, higher error rates in the data gathered by the camera will be recorded by the vehicle’s computer system. It causes the system to malfunction and can trigger a warning message.
3. Sensing limitation
There are certain limitations to the system’s camera detection. In some cases, the system can not correctly process data obtained from the camera at night. The angle of collision could also be due to the camera’s position.
All these limitations may cause the system to malfunction because it cannot correctly differentiate between a potential collision and no threat.
4. Camera is too hot
The camera is not designed to work under extreme heat. As we know, a large part of the camera is plastic. Under extreme heat, camera parts will break down, leading to the system’s complete failure.
5. Recall issue
There have been recalls on certain Hyundai vehicles based on the vehicle safety system. If your car falls under this vehicle category, it could be much harder to determine what could cause the error message. It is best to have the vehicle checked by a professional.
How can you fix the Hyundai Check Forward Safety System?
When faced with a check forward safety system alert, the first step that should be done is to restart the car. Sometimes, the error message can be a simple malfunction in the system. If the error message remains, you have a much more severe problem.
Furthermore, try and figure out what could be the cause of the error message by examining the various related components.
Below are ways to fix a check-forward safety system.
1. Check the camera, which can be located inside the windshield near the rearview mirror. Clean the camera area adequately. Remove and clean the camera if there is dirt within the camera.
2. Try and adopt tips to protect the vehicle from extreme heat to keep the camera from overheating.
3. Use a scan tool to test the camera; you may have a damaged camera. It would be best to replace the camera once you are sure it is damaged.
4. Check the forward safety system wires for any damages. If damages are found, replace the wires.
5. Take vehicle to a professional for proper diagnosis and fix.
How Can I Activate Forward Safety System?
If the forward safety system is not activated, below is an easy-to-follow step to activate the system.
1. Switch on the car, and navigate to settings from infotainment system screen.
2. Select driver assistance and then forward collision avoidance. Ensure that the box next to the option is checked.
3. Navigate to forward collision warning and select late, normal, and early. If driving at high speed or in the city, you should choose early.
4. Now, you have successfully activated the forward safety system.
Final thoughts
In most cases, it could be tricky to diagnose and fix the check forward safety system issues when you do not have much mechanical knowledge. It would be best if the is taken to a professional to help with proper diagnosis and repair. It may cost more to fix, but it will prevent further damage.
-
by
-
